Constant Systems is
registered and approved by British Standards Institute
ISO 9001:2000
FS67550
Cell Disrupter inlet and outlet options
Each cell disrupter is supplied with a standard inlet and outlet option as detailed below:
T-Series 0.75kW Inlet A – Outlet A
T-Series 1.1kW, 2.2kW & 4kW Inlet G – Outlet A
B/C-Series Inlet H – Outlet C
The inlet is a reservoir for the sample prior to disruption and the outlet is a hose tail so that either a beaker or piping can be used to collect the disrupted sample. Alternative or additional inlets/outlets can be specified from the options below.
The choice of inlet/outlet arrangement depends upon the volumes to be processed and the level of containment and sterility required. All Constant Cell Disruption Systems are contained during operation but if complete containment is required then care must be taken at the point of inlet and outlet.
Please note that the inlet and outlet must not be to or from rigid containers without ventilation.
If a different combination of inlet/outlet is required to the standard supplied then this can be
specified from the list below. The first letter specifies the inlet and the second the outlet. These two letters are used in the Cell Disrupter Model Code.
Inlet Options
Inlet A - Fixed 200ml inlet reservoir/funnel 3D View
Inlet B - Fixed hose tail for 3/8" (10mm) inside dia hose 3D View
Inlet C - Fixed hose tail for 1/2" (12mm) inside dia hose 3D View
